產品特點
相關產品與服務
品 名：高鈣、高硫酸根水質蒸發阻垢劑
型 號：SGR1108
主要成分: 有機膦酸鹽、膦羧酸、聚羧酸、樹狀大分子阻垢分散劑等。
理化指標：
產品分類
品 名：高鈣、高硫酸根水質蒸發阻垢劑
型 號：SGR1108
主要成分: 有機膦酸鹽、膦羧酸、聚羧酸、樹狀大分子阻垢分散劑等。
理化指標：
性能用途：
在高硫酸根與高鈣污水用MVR或多效蒸發器蒸發過程中，極易在設備表面生成硫酸鈣硬垢，造成換熱效率、蒸發量快速下降，造成設備短時間就需要停機清洗。硫酸鈣垢堅硬，致密，難以清洗，高壓水打垢費時費力，且極易損傷設備。SGR-1108是針對蒸發器硫酸鈣結垢問題的專用藥劑,該藥劑能有效的減少高硫酸根、高鈣廢水在蒸發時產生的硫酸鈣、碳酸鈣、碳酸鎂等結垢，對硫酸鈣阻垢率>90%。
藥劑通過螯合增容、晶格修辭等作用，達到阻垢作用，分散劑還會與蒸發器表面所結污垢發生化學反應，使之不易在蒸發器表面沉淀附著，剝離老垢。保證了蒸發器表面清潔，提高熱傳導速度，延長蒸發設備使用壽命和清洗周期。
使用方法：將SGR-1108專用阻垢分散劑在加藥罐中稀釋后通過計量泵，按計量隨廢水一起加入蒸發設備中，也可直接加入原液。一般用量為80～120ppm，根據水質情況確定具體用量。藥劑使用之前應將加藥箱和管線置換沖洗干凈，避免影響使用效果。
包裝貯運：用25kg、200 kg、1000kg塑料桶包裝，存放于陰涼干燥處，貯存期十二個月，搬運時小心輕放，防止撞擊。
Product name: high calcium, high sulfate root water quality evaporation scale inhibitor
Model number: SGR1108
Main components: organic phosphonates, phosphonic carboxylic acid, polycarboxylic acid, dendrimer scale resistance dispersant, etc.
physicochemical indexes:
Performance and purpose:
In the evaporation process of MVR or multi-effect evaporator for high sulfate and high calcium sewage, it is easy to generate calcium sulfate hard scale on the surface of the equipment, resulting in the rapid decline of heat transfer efficiency and evaporation, resulting in the equipment in a short time. Calcium sulfate scale is hard, dense, difficult to clean, high-pressure water scale is time-consuming and laborious, and easy to damage the equipment. SGR-1108 is a special agent for the scaling of calcium sulfate in the evaporator. This agent can effectively reduce the scaling of calcium sulfate, calcium carbonate and magnesium carbonate produced by the evaporation of high sulfate and high calcium wastewater, and the scale resistance rate of calcium sulfate is> 90%.
By chelating capacity enhancement and lattice rhetoric, the agent can achieve scale resistance. The dispersant will also chemically react with the dirt on the surface of the evaporator, so that it is not easy to precipitate and attach on the surface of the evaporator and peel off the old scale. It ensures the surface cleaning of the evaporator, improves the heat conduction speed, and extends the service life and cleaning cycle of the evaporation equipment.
Usage: dilute SGR-1108 special scale resistance dispersant in the dosing tank through the metering pump, add to the evaporation equipment together with the wastewater, or directly add the stock solution. The general dosage is 80~120ppm, and the specific dosage is determined according to the water quality. Before the use, the medicine cabinet and pipeline should be rinsed to avoid affecting the use effect.
Packaging and storage: with 25kg, 200 kg, 1000kg plastic barrels, stored in a cool and dry place, storage period of 12 months, carefully placed when handling to prevent impact.
